|
|
|
|
|
|
|
|
|
|
|
|
|
Insist For This
Hologram Security
Seal
For The Genuineness
Of Our Product |
. |
|
|
|
|
|
Indoor Gland For Single Wire
Armoured Cables |
|
Gland
reference |
Cable
dimensions |
Gland
dimensions |
|
|
Diameter |
Entry thread |
Across
flats
(E) |
Across
corners
(F) |
Under
armour
(A) |
Overall
Diameter
(B) |
Entry
(C) |
Length
(D) |
|
size |
mm |
mm |
inch |
mm |
mm |
mm |
|
1616 |
9.0 |
15.0 |
5/8" |
9.5 |
25.0 |
29.0 |
|
1619 |
10.0 |
15.0 |
3/4" |
9.5 |
25.0 |
29.0 |
|
2119 |
14.0 |
20.0 |
3/4" |
9.5 |
31.5 |
35.0 |
|
2125 |
14.0 |
20.0 |
1" |
9.5 |
31.5 |
35.0 |
|
2925 |
20.0 |
26.0 |
1" |
10.0 |
40.0 |
46.0 |
|
2932 |
24.0 |
29.0 |
11/4" |
10.0 |
40.0 |
46.0 |
|
2938 |
24.0 |
29.0 |
11/2" |
10.0 |
40.0 |
46.0 |
|
3638 |
31.0 |
37.0 |
11/2" |
11.0 |
51.0 |
57.0 |
|
4251 |
36.0 |
42.0 |
2" |
11.0 |
60.0 |
68.0 |
|
5451 |
44.0 |
50.0 |
2" |
12.0 |
68.0 |
78.0 |
|
5463 |
44.0 |
50.0 |
21/2" |
12.0 |
68.0 |
78.0 |
|
6063 |
54.0 |
60.0 |
21/2" |
12.0 |
78.0 |
90.0 |
|
6675 |
60.0 |
66.0 |
3" |
13.0 |
84.0 |
96.0 |
|
7882 |
70.0 |
77.0 |
31/4" |
15.0 |
99.0 |
112.0 |
|
|
|
Application |
|
For use
under most climatic conditions.This are
Weatherproof and may be used in the
corrosive conditions when protected by
the shroud. |
|
Specification |
|
Gland
consist of checknut 1, gland body 2,
metal washers (3 Nos) 3, outer seal
rubber ring 4, compression nut 5. All
metal parts are made of brass accurately
machined for ease of assembly.
|
|
Extras |
|
Shrouds
and Earth tags are supplied separately
and should be specified when ordering
the gland. |
| |
Fitting Sequence: |
 |
|
a) |
Screw
item 2 into apparatus (secure with
item 1 if plain hole entry.) |
|
b) |
Pass item 5, item 3 and item 4
over cable before commencing to
strip oversheath. |
|
c) |
Remove the outer sheath to the
desired length depending on the
length of leads required. |
|
d) |
Pass item 3 over the cable and
splay out the armour wire one by one
and then cut the armour wires
according to the size of washer.
Insert the third metal washer over
inner sheath of cable so that bend
armour are secured between the two
metal washers. |
|
e) |
Push the cable through item 2 and
engage the item 5 with item 2 and
tighten up while doing, so the grooved
rubber ring will contract in radial
direction and will grip the outer
sheath of cable. |
|
|
|
|
|
|
2005 Comet Cable Gland & Terminals. All Rights Reserved. |
|
|
|
